About C330M Cooled Infrared Detector
The Most Professional, Classical 320x256 / 30μm MWIR MCT Cooled Infrared Detector
Product Description
C330M MWIR MCT cooled infrared detector comes with 320X256 format at the pixel size of 30μm. It is interchangeable with most mainstream MARS like products when configured with RS058 integrated stirling cooler. It can be used for almost all possible applications like long range surveillance system, handheld thermal imagers, gas leakage detection cameras etc.
The dewar design, the cooler dimension, and the mechanical/electrical interface are almost the same so that the camera integrators only need to take out their old defective counterpart and connect our interchangeable C330M RS058 easily for further internal configuration.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30μm
- High Sensitivity
- Compact Design
- Lightweight
- Low Power Consumption
Product Specifications
| Model | C330M MW |
| Material | MCT |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Spectral Range | 3.7μm～4.8μm MW |
| Working Mode | Snapshot, ITR Integration Mode; Windows Mode; Anti-blooming |
| Charge Capacity | 36Me-/12Me- |
| Dynamic Range | ≥80dB |
| Number of Output | 1 or 4; Up to 6.6Mpixel/s per Output |
| NETD | F2: ≤9mK
F4: ≤15mK |
| Effective Pixel Rate | ≥99.5% |
| Response Non-uniformity | ≤8% |
| Cryocooler Type | RS058/RS046H |
| Steady Power Consumption | ≤6W @ RS058
≤6W @ RS046H |
| Max Power Consumption | ≤12W @ RS058
≤11W @ RS046H |
| Power Supply | RS058: 24V DC
RS046H: 32V DC |
| Cooling Time | ≤6min @ RS058
≤5min30s @ RS046H |
| Weight | ≤600g |
| Dimension (mm) | 142x58.5x71 |
| Working Temperature | -45°C ~ +71°C |
Industrial Applications
The C330M MWIR cryogenically cooled infrared detector is widely used many areas such as Remote Monitoring System, Flight Vision Enhancement System, Multi-sensor Payload etc.
About Global Sensor Technology
FAQs
1. How does uncooled focal plane array microbolometer work?
By using the principle of infrared radiant thermal effect, the uncooled infrared detector converts infrared radiation energy into heat energy with infrared absorption material, so that the temperature of the sensitive material increases. Then, a certain physical parameter of the sensitive material changes accordingly and converts into electrical signal or visible light signal through a certain conversion mechanism designed to realize the detection of the object.
2. What's the advantage of uncooled vox microbolometer?
Uncooled infrared focal plane detector does not need an Integrated Dewar Cooler Assembly (IDCA) device and can work at room temperature. It has the advantages of fast start, low power consumption, small size, light weight, long life, low cost and so on. Although the sensitivity of uncooled infrared focal plane detector is not as good as that of cooled infrared detectors, after years of development, its cost performance has been obviously better than the cooled detector, which has a broader application prospect.
Product Tags:
|
|
Cooled FPA MCT IR Detector 320x256 30μm for Fast Integration Images
|
